Page 1 of 1

Starter Motor Repair (Solenoid) Pt 2

Posted: 25 Aug 2013, 19:32
by Pompier
Remove 3 end bolts from solenoid side.
P1060664.JPG
P1060664.JPG (196.74 KiB) Viewed 2786 times

Remove plunger
Undo 17mm nuts from either side that hold on contacts and replace with new ones (don't overtighten)
Replace new plunger and refit end cap.
Reassemble and bolt up and re-connect battery and hey presto!!
P1060667.JPG
P1060667.JPG (188.8 KiB) Viewed 2786 times

P1060669.JPG
P1060669.JPG (221.65 KiB) Viewed 2786 times