there are 3 rows of RGB female plugs on there, the middle row farthest right one is camera on mine
if you have the rest of the unit plugged in with the wiring harness you can set the unit to show the camera feed, then hold the unit and just try each of those RGB plugs until the camera comes on. leave it in each plug a couple of seconds as mine has a delay before it will show the image
hope this is helpful
I have sat with the unit on my knee and gone through ebays “Toyota reversing camera adapter” lists and none of them look like any of the plugs on the back of mine !?
- 2C45171F-1165-4EB5-9EF5-65D9A30D1995.jpeg (2.71 MiB) Viewed 1425 times
Have you tried getting a manual my searching the model no?
Is your reverse cam factory fitted, or an aftermarket thing?
My camera was made by kenwood, fits my sony unit no problem. It seems to be a very simple thing electrically, and has just 2 wires (red and black) running from the camera to an audio type plug that fits the head unit
Who is online
Users browsing this forum: No registered users and 7 guests